35
CM550
CM550 (ISB / ISC 1998-2002, VP44 / CAPS) — 1 product ids: CM550-VP44.
Every Cummins ECFG we hold, in one searchable index — 954 Engineering Tool Config Files plus 522 legacy E2M files across 172 product ids, CM550 / CM570 through CM3230.
Look up by product id + software version — exactly as the ECFG header carries them.
Custom file service — upload your .xcal, pick DTC delete, full delete, extra HP or VGT delete.
Instant download — ECFG files from $100, legacy E2M $50; pay with PayPal or card and the link appears immediately.
| Product ID | Software version | Module | Engine | Application | Created | Parameters | Buy |
|---|
ECFG definitions for every Cummins electronic control module generation — from the 2003 CM850 Core-II through CM871, CM2150, CM2250, CM2350A/B, the EPA21 CM2450 family, China VI CM2670, natural-gas CM2880 and the CM3230. Counts are ECFG files per module.
CM550 (ISB / ISC 1998-2002, VP44 / CAPS) — 1 product ids: CM550-VP44.
CM552 (ISC CAPS) — 1 product ids: ECM.
CM554 (ISC / ISL CAPS) — 3 product ids: CM554-CAPS, ISC, ISL.
CM570 (ISX / ISM Signature, 1998-2007) — 6 product ids: API, APX, DEL, ECM, ISX, QSM.
CM800 (Celect Plus N14 / M11) — 1 product ids: ECH.
CM850 / CM870 Core-II (2003-2007) — 7 product ids: ABC, BAC, BAQ, E2I, EC2, P2I, XXX.
CM870 (ISX EGR 2002-2007) — 1 product ids: ENF.
CM871 / CM876 (EPA07, 2007-2010) — 3 product ids: BAB, BAC, BCH.
CM1881 aftertreatment / industrial — 1 product ids: BCQ.
CM2100 / CM2150 PV midrange (2008-2012) — 8 product ids: BAD, BAE, BAF, BAH, BAI, BAR, BCW, XXX.
CM2150 / CM2150D / CM2150E (2008-2014) — 3 product ids: BAE, BAG, BBW.
CM2200 Chrysler ISB (2010-2012) — 11 product ids: BAF, BAM, BBV, BBW, BBX, BBY, BDU, BEH, BEI, BEU, BIL.
CM2250 (E2M era, pre-2008) — 29 product ids: AAJ, BBH, BBI, BBK, BBN, BBO, BBP, BBQ, BBR, BBS, BBZ, BCA, BCC, BCQ ….
CM2350A / CM2350B (2013-2020) — 39 product ids: ABC, BCK, BCL, BCX, BDC, BDD, BDF, BDH, BDO, BDR, BEE, BEF, BEG, BFK ….
CM2450A / CM2450B / CM2450E (EPA21, 2018+) — 9 product ids: BHQ, BJS, BJX, BKK, BKR, BLO, BMF, BNN, BRQ.
CM2620A Euro VI midrange — 2 product ids: BJW, BLF.
CM2670A / F / F1 China VI + industrial — 11 product ids: BJV, BJW, BJZ, BKC, BKE, BKF, BKI, BLF, BLN, BLY, BOQ.
CM2880A natural gas + small bore — 14 product ids: BDS, BEY, BFE, BFF, BFR, BFS, BGE, BHG, BIJ, BIK, BJA, BJC, BKY, BSU.
CM3230A / CM3230B (2016+) — 2 product ids: BCX, BFY.
legacy E2M file, module not recorded in file — 44 product ids: AAB, AAJ, AAK, ABC, C-GAS-PLUS, C94-CELECT-PLUS, CELECT, CELECT-625, CELECT-PLUS, CELECT-PLUS-CONF, CELECT91, CENTINEL, CENTRY, CHR ….
From the 2.8L ISF to the QSK high-horsepower series — grouped by the engine family the ECFG program name and product id identify.
Product ids ABC, E2M, E2M-ECFG-LATEST, ENF, OLDER-E2M, OTHER-E2M-FILES
Product ids BAD, BAG, BCA, BDC, BDF
Product ids AAJ, ABC, BAI, BBI, BBS, BCC, BDM, BDN, BDU, BDV, BEF, BEG …
Product ids BHQ
Product ids APX, BCW, ENF, ISX
Product ids BDO
Product ids C94-CELECT-PLUS, CELECT, CELECT-625, CELECT-PLUS, CELECT-PLUS-CONF, CELECT91, ECI
Product ids BDR
Product ids ABC, BBN, BGU, BKW, ISL
Tuners know DAMOS and A2L from Bosch and Continental ECUs. On a Cummins ECM the same job is done by the ECFG (Engineering Tool Config File): it names every calibration parameter in the .xcal, gives its ITN address, data type, scaling, units and limits, and is what Cummins Calterm and INSITE use to read and write the calibration. With the ECFG for your product id and software version you can open the calibration in Calterm, or have it converted to a WinOLS map pack or A2L, and find the torque curves, fuelling and rail-pressure tables, boost and VGT control, EGR, DPF regeneration, SCR / DEF dosing, speed limiter, idle shutdown and the fault-code enable tables — everything a DPF, EGR or DEF delete, a DTC delete, a VGT delete or a power tune needs.
CM871, CM2250, CM2350A and the EPA21 CM2450 Wolf / BoaVista / RedWolf families — Kenworth, Peterbilt, Freightliner, International and Western Star trucks. X15 / ISX15 ECFG files →
CM2100, CM2200, CM2350B and the CM2450B Vulture generation — BAG, BCA, BDC and BHQ product ids, MY2007 to MY2024. ISB6.7 ECFG files →
School bus, motorhome, refuse, fire and vocational trucks on CM2150, CM2250, CM2350A and CM3230. L9 / ISL9 ECFG files →
Komatsu, Hyundai, JCB and mining / oilfield engines — Tier 4 and Stage V industrial calibrations on CM2250, CM2350A and CM2880. Browse every engine →
Every ECFG is the original Cummins Engineering Tool Config File XML — it opens in Cummins Calterm and gives every parameter its name, ITN address, data type, units, scaling and limits. On request the same definition is delivered as a WinOLS OLSX map pack (every parameter placed at its real address in your calibration, named and foldered) or as an A2L for XCP / CCP tools.
Open the ECFG (or your .xcal calibration) in a text editor: the first lines carry version="64.60.21.5" and
<product_id>BKR</product_id>. That pair is the file’s identity.
Type the product id and version in the search box. Exact hits show the file’s full header; the product id page lists every neighbouring version if yours is missing.
Drop your calibration below and we confirm the match in your browser before you send anything. Delivered as ECFG, OLSX or A2L.
An ECFG (Engineering Tool Config File) is the Cummins XML definition that tells Calterm what every parameter in a calibration is: name, address (ITN), data type, units, scaling and limits. It is the Cummins equivalent of a DAMOS or A2L.
Open your calibration (or ask INSITE / Calterm) for the product id and software version — e.g. product id BKR, software version 64.60.21.5. Search that pair above. The ECFG header carries exactly those two fields.
Yes. Parameter names are stable within a product id, so a neighbouring version of the same product id usually resolves almost every parameter. We can also synthesise an ECFG for your exact calibration from its index table.
Yes. Any ECFG in the archive can be converted to a WinOLS OLSX map pack (named, scaled, foldered) or an A2L for XCP / CCP tools.
Open the file's page, pay with PayPal or a card through the PayPal button, and the download link appears on the page the moment the payment is verified by our server. Prices are shown on each file page. The link stays valid for 72 hours and allows 5 downloads; you can re-issue it from the same page with your PayPal order id.
Yes. Upload the .xcal in the custom file service section, tick specific DTC delete (list the codes), full DPF / EGR / SCR delete, extra HP with your target, VGT delete or any single feature change, and send the request by WhatsApp or email. The work is done on your own calibration and returned as an .xcal ready to flash.
Functionally yes. DAMOS and A2L are the definition files used for Bosch and Continental ECUs; the ECFG is the Cummins definition for the Cummins ECM. It lists every parameter with address, type, scaling and limits. We supply the original ECFG and can convert it to a WinOLS map pack or A2L on request.
The ECFG is the map you need to find the aftertreatment, EGR, DEF dosing, derate and fault-code tables in your calibration. Deletes are supplied for off-road, export and research use only; see the terms page.
X15, ISX15, ISX12, X12, ISM, ISB6.7 (Ram pickup and chassis), B6.7, ISC8.3, L9, ISL9, L8.9, ISF2.8, ISF3.8, F3.8, ISV5.0, ISG11/12, QSB, QSC, QSL, QSM, QSX, QSK, QST30 and natural gas engines, from 1997 E2M files to the current EPA21 / China VI ECFGs.
CM850, CM871/876, CM2100, CM2150, CM2200, CM2250, CM2350A/B, CM2450A/B/E, CM2620A, CM2670A/F, CM2880A and CM3230 — every Cummins electronic control module from 2003 to the current EPA21 / China VI generation.
Upload your Cummins .xcal (or .ecfg / .bin) and tick what you need done. The product id and software version are read from the file in your browser — nothing is uploaded until you choose to send it. Specific DTC delete, full emissions delete, extra HP / torque, VGT delete, or just the ECFG / WinOLS pack for your version.
The file is uploaded to our server when you press Send, so it arrives with your request; the WhatsApp / email message carries the reference number.
Your calibration is uploaded securely to our server when you press Send and the message carries its reference. Turnaround is typically same day for DTC and delete work. Prefer to just talk? WhatsApp +66 98 861 6568 · Email admin@ecfgsuperstore.com · Terms & refunds · Also from ECU Developers: John Deere DAMOS Vault