Cummins BDR 4.12.0.4 ECFG — ISX15 / ISX12 (EPA13) CM2350 tuning definition

Name: Cummins BDR 4.12.0.4 ECFG — ISX15 / ISX12 (EPA13) CM2350 tuning definition
Brand: Cummins
SKU: BDR-4.12.0.4
Price: 100.00 USD
Availability: InStock

Cummins BDR 4.12.0.4 ECFG — the ECFG definition file (Cummins DAMOS equivalent) for ISX15 / ISX12 (EPA13) (Heavy duty on-highway) on the CM23xx ECM: 21,199 named parameters for Calterm / WinOLS tuning — torque, fuelling, boost/VGT, EGR, DPF, SCR/DEF, speed limiter and fault-code tables. Build ID —, created 2011-05-27. Instant download after PayPal checkout.

FormatECFG — Engineering Tool Config File (XML)Product IDBDRSoftware version4.12.0.4ModuleCM23xxECU platformCM2350A / CM2350B (2013-2020)EngineISX15 / ISX12 (EPA13)Application / marketHeavy duty on-highwayEmissionsEPA13ProgramHD-X13-C-C31.00.00.00-ISX-4.12.0.04_00Build ID—Creation date2011-05-27Copyright year2011Parameters21,199 named parameters (<parameter> records)Interface level4.5.4.2First prod cfg file version2003.1.1.0Module part number9999999Boot loader range2.3.0.0 → 2.3.0.7Byte orderBigEndianIndex table address0x00042000Price$100 · instant download after PayPal checkoutHeader CRCB828File size14.0 MBArchive copies11 copies heldFormatECFG XML (Engineering Tool Config File) · opens in Cummins Calterm; converts to WinOLS map pack / A2L on request

<Engineering_Tool_Config_File version="4.12.0.4" crc="B828"> <compatibility_header> <calibration_version>4.12.0.4</calibration_version> <module_name>CM23xx</module_name> <product_id>BDR</product_id> <file_descriptor>Core-II Software Copyright 2011 Cummins Inc. - Cummins Confidential - HD-X13-C-C31.00.00.00-ISX-4.12.0.04_00</file_descriptor>

What is inside this ECFG

21,199 parameters — 2,020 tables / axes. Counts by area (a parameter can sit in more than one):

846Torque / power

913Fuelling / rail

665Boost / turbo / VGT

813EGR

1,119DPF / DOC / regen

1,923SCR / DEF / NOx

902Speed / cruise / idle

1,647Fault codes / derates

879Sensors / calibration

Parameter	Area	Description	Units
ACA_Torque	Torque / power	Torque consumed by all ACAs.	N_m
ACA_Torque_Max	Torque / power	Torque value that all ACA can consume at most.	N_m
Actual_Eng_Ind_Perc_Trq_Hi_Res	Torque / power	Parameter is used for broadcasting the high resolution portion of torque that goes with Actual_Eng_Indicated_Perc_Trq on J1939.	%
Actual_Eng_Indicated_Perc_Trq	Torque / power	Parameter is used for broadcasting Actual Engine Percent Torque on the datalink	%
Actual_Max_Avail_Eng_Perc_Trq	Torque / power	Parameter is used for broadcasting Actual Maximum Available Engine - Percent Torque (J1939 SPN 3357) through datalink. It is the maximum amount of torque that t	%
AH_Fuel_Derate_Latch	Fuelling / rail	[AHFLDRLA] Indicates turbo overspeed protection fuel derate [From 02 -- Units: UNITLESS Size:2 Digits:0 Signed:U Scalar:1] [Jims comp:{EMM}]	None
AIC_q_TargetFuelArray	Fuelling / rail	Fueling array of the current pressure bucket
AIF_AlphaFuelRate	Fuelling / rail	Alpha request from fuel rate section of the Alpha algorithm (boolean 0 or 1)	None
AIF_FuelRate	Fuelling / rail	Fuel Rate algorithm as determined by the alpha determination algorithm.	kg/hr
APC_ti_HiPrsFuelDuration	Fuelling / rail	Used to verify fueling continuously exceeds a minimum threshold before enabling high pressure diagnostic up/down counters.	s
AIF_AlphaAAPTurboProt	Boost / turbo / VGT	Alpha contribution from ambient air pressure logic of the alpha algoirthm (boolean 0 or 1)	None
AIP_ChargePress_Override_Value	Boost / turbo / VGT	Charge Pressure override value	kPa
AIP_Charge_Tmptr_Override_Value	Boost / turbo / VGT	Charge_Tmptr override value when T_AIP_CHT_User_Override is set..	Deg_C
BPS_BoostEngaged	Boost / turbo / VGT	Hook identifying that Boost Power is actively engaged.	None
BVC_s_LowBoostVoltage	Boost / turbo / VGT	low boost voltage indicator	None
AIP_EGRDeltaPress_Override_Val	EGR	EGR Delta Press user override value when T_AIP_EGRDeltaPress_Ovrd_En is set.	kPa
AIP_EGROrificePress_Ovrd_Val	EGR	EGR Orifice Pressure override value	kPa_A
AIP_EGROrificeTmptr_Ovrd_Val	EGR	EGR Orifice Temperature user override value when T_AIP_EGROrificeTmptr_Ovrd_En is set.	Deg_C
CBL_EGR_Frac_Cmd	EGR	EGR fraction command passed to Charge Manager from Combustion Manager Base	None
CBL_EGR_Frac_Cmd_Enable	EGR	Enable for EGR Fraction Command Processing in Charge Manager Base	None
C_AIM_DOC_In_DualPullupEnbl	DPF / DOC / regen	Flag enabling the dual pullup for the thermistor	None
C_AIM_DOC_Out_DualPullupEnbl	DPF / DOC / regen	Flag enabling the dual pullup for the thermistor	None
C_AIM_DPF_Lamp_ID	DPF / DOC / regen	DPF Lamp ID(1 = STOP, 2 = WARNING, 3 = MAINTENANCE,4,5,6 ... unmapped)	None
C_AIM_DPF_OutP_Sensor_Present	DPF / DOC / regen	Flag indicating if the system contains a gage pressure sensor at the outlet of the DPF.	None
C_AIM_DPF_Out_DualPullupEnbl	DPF / DOC / regen	Flag enabling the dual pullup for the thermistor	None
CBM_Dosing_Prohibit_EGR	SCR / DEF / NOx	Prohibits EGR Control when In-cylinder dosing is active	None
CBM_NOx_Out_PPM	SCR / DEF / NOx	Enigne out virtual nox value in ppm	PPM
CBR_Dosing_CylCutoutMask	SCR / DEF / NOx	Bit mapped mask indicating what cylinders are cutout for in-cylinder dosing. Bit 0=cut out cylinder 1, bit 1=cut out cylinder 2 etc. When the corresponding bit	HEX
CBR_EC_SCRTM_WT_Factor	SCR / DEF / NOx	Steady state EC weighting factor for SCR thermal mgt. Chi	None
CBR_Incyl_Dosing_Cutout_Flag	SCR / DEF / NOx	In-Cylinder Dosing Cutout Flag	None
AFW_Idle_Speed	Speed / cruise / idle	The idle speed calculated by the Alternator Failure warning feature	RPM
AIF_AlphaGovernor	Speed / cruise / idle	result of On Governor logic (boolean 0 or 1)	None
APP_On_Idle	Speed / cruise / idle	Indicates whether or not the Accelerator is in the Idle position. Value is determined by either idle validation switches or Secondary_Accel_Pedal_Pos, dependin	None
AP_Low_Idle_Switch	Speed / cruise / idle	Switch signal which indicates whether the accelerator pedal low idle switch is opened or closed. 0x00 Accelerator pedal not in low idle condition 0x01 Accel	None
Accelerator_Governor_Switch	Speed / cruise / idle	Debounced value of Accelerator Governor Switch physical input. When TRUE, this input causes Selected_Governor to toggle from "ABS" to "ABT" or vice versa depe	None
AIF_AlphaAltDerate_Timer	Fault codes / derates	semaphore used to latch AFC events that occur between alpha executions	s
CAC_OBD_Tmptr_Thd	Fault codes / derates	output of CAC OBD temperature threshold look up table.	Deg_C
CAGT_Block_Fault_Codes	Fault codes / derates	Array of fault codes to be blocked. Fault codes can be found in CES14602 specification. Size of this array and hence the maximum number of faults that can be bl
CAGT_ENG_OBDAD_Data_Reset_Ptr	Fault codes / derates	funtion pointer to service OBDAD_Data_Reset of OBD-Administrator	None
CAGT_FreezeActFaultCodesFlag	Fault codes / derates	If it is TRUE, it freezes the active fault codes, and if it is FALSE, active fault codes are processed normal.	None
AIP_WIF_Sensor_Count	Sensors / calibration	This parameter provides the run-time filtered count for WIF Sensor.	counts
AIP_WIF_Sensor_Voltage	Sensors / calibration	analog voltage for water in fuel sensor input	V
APC_v_DslPrsSensor	Sensors / calibration	Diesel Rail Pressure Sensor Voltage (ref to 5V)	V
APM_ct_Signal2Pressure	Sensors / calibration	Accumulator Pressure-2 in counts from duel sensor.	counts
APM_hp_Signal1Pressure	Sensors / calibration	Signal-1 Accumulator Pressure in Bar(units) from duel sensor. NOTE: This data is calculated only when signal-2 pressure is calculated.	bar

Sample of named calibration parameters with their Cummins descriptions. The full ECFG lists every parameter with ITN address, data type, scaling, limits and units.

Other BDR versions (45)

Buy & download

Loading checkout…

Custom file service on your .xcal: DTC / full delete, extra HP, VGT delete