ECFG Superstore › BDS › 7.0.0.5
MY ACCOUNT / MY FILES →Cummins BDS 7.0.0.5 ECFG — ISG11 natural gas CM2880 tuning definition
Cummins BDS 7.0.0.5 ECFG — the ECFG definition file (Cummins DAMOS equivalent) for ISG11 natural gas (Heavy duty on-highway) on the CM28xx ECM: 17,018 named parameters for Calterm / WinOLS tuning — torque, fuelling, boost/VGT, EGR, DPF, SCR/DEF, speed limiter and fault-code tables. Build ID —, created 2013-12-11. Instant download after PayPal checkout.
FormatECFG — Engineering Tool Config File (XML)Product ID
BDSSoftware version7.0.0.5ModuleCM28xxECU platformCM2880A natural gas + small boreEngineISG11 natural gasApplication / marketHeavy duty on-highwayEmissionsEPA13ProgramHD-Class1-C31.00.00.00-CM2880-7.00.0.05Build ID—Creation date2013-12-11Copyright year2013Parameters17,018 named parameters (<parameter> records)Interface level4.6.0.0First prod cfg file version2003.1.1.0Module part number9999999Boot loader range2.8.3.0 → 2.8.3.10Byte orderBigEndianIndex table address0x00042000Price$200 · instant download after PayPal checkoutHeader CRC2434File size11.4 MBArchive copies4 copies heldFormatECFG XML (Engineering Tool Config File) · opens in Cummins Calterm; converts to WinOLS map pack / A2L on request<Engineering_Tool_Config_File version="7.0.0.5" crc="2434">
<compatibility_header>
<calibration_version>7.0.0.5</calibration_version>
<module_name>CM28xx</module_name>
<product_id>BDS</product_id>
<file_descriptor>Core-II Software Copyright 2013 Cummins Inc. - Cummins Confidential - HD-Class1-C31.00.00.00-CM2880-7.00.0.05</file_descriptor>
What is inside this ECFG
17,018 parameters — 1,922 tables / axes. Counts by area (a parameter can sit in more than one):
777Torque / power
916Fuelling / rail
406Boost / turbo / VGT
417EGR
123DPF / DOC / regen
1,485SCR / DEF / NOx
888Speed / cruise / idle
1,102Fault codes / derates
667Sensors / calibration
| Parameter | Area | Description | Units |
|---|---|---|---|
| ACA_Torque | Torque / power | Torque consumed by all ACAs. | N_m |
| ACA_Torque_Max | Torque / power | Torque value that all ACA can consume at most. | N_m |
| ATLCKT_Torque_Request | Torque / power | The dynamic high request submitted by the anti theft lockout algorithm | N_m |
| Actual_Eng_Ind_Perc_Trq_Hi_Res | Torque / power | Parameter is used for broadcasting the high resolution portion of torque that goes with Actual_Eng_Indicated_Perc_Trq on J1939. | % |
| Actual_Eng_Indicated_Perc_Trq | Torque / power | Parameter is used for broadcasting Actual Engine Percent Torque on the datalink | % |
| AH_Fuel_Derate_Latch | Fuelling / rail | [AHFLDRLA] Indicates turbo overspeed protection fuel derate [From 02 -- Units: UNITLESS Size:2 Digits:0 Signed:U Scalar:1] [Jims comp:{EMM}] | None |
| AIC_ct_LowFuelCvrg | Fuelling / rail | This is the count that indicates the number of cells (Pressure/Fuel points) covered for each cylinder in the low Fueling Coverage Map | |
| AIC_q_MeasFueling | Fuelling / rail | The actual fueling commanded by IFC during an AES or IFM test data collection. | mg/stroke |
| AIC_q_TargetFuelArray | Fuelling / rail | Fueling array of the current pressure bucket | |
| AIC_s_FuelingRegion | Fuelling / rail | The fueling region associated with the commanded total fueling: 0 = NO_FUELING 1 = LOW_FUELING 2 = INTERPOLATION 3 = MID_FUELING 4 = HIGH_FU | None |
| AIF_AlphaAAPTurboProt | Boost / turbo / VGT | Alpha contribution from ambient air pressure logic of the alpha algoirthm (boolean 0 or 1) | None |
| AIP_ChargePress_Override_Value | Boost / turbo / VGT | Charge Pressure override value | kPa |
| AIP_Charge_Tmptr_Override_Value | Boost / turbo / VGT | Charge_Tmptr override value when T_AIP_CHT_User_Override is set.. | Deg_C |
| BPS_BoostEngaged | Boost / turbo / VGT | Hook identifying that Boost Power is actively engaged. | None |
| BVC_s_LowBoostVoltage | Boost / turbo / VGT | low boost voltage indicator | None |
| AIP_EGROrificeTmptr_Ovrd_Val | EGR | EGR Orifice Temperature user override value when T_AIP_EGROrificeTmptr_Ovrd_En is set. | Deg_C |
| CBL_EGR_Frac_Cmd | EGR | EGR fraction command passed to Charge Manager from Combustion Manager Base | None |
| CBL_EGR_Frac_Cmd_Enable | EGR | Enable for EGR Fraction Command Processing in Charge Manager Base | None |
| CBP_EGR_Air_Mole_Ratio | EGR | EGR vs Air Mole Ratio | None |
| CBR_EGR_Off | EGR | EGR is off by EMM permission or user override | None |
| C_AIM_FT_SCR_Regen_Enbl | DPF / DOC / regen | Enable for SCR Regen FTIS. | None |
| C_AIM_FT_SCR_Regen_UserSelect | DPF / DOC / regen | Indicates to the tool whether the SCR Regen feature is available for selection | None |
| C_AIM_tm_FT_SCR_Regen | DPF / DOC / regen | Time allowed for tool initiated SCR Regen. | s |
| C_AIM_tm_FT_SCR_Regen_Max | DPF / DOC / regen | Overall time allowed for tool initiated SCR Regen that includes HC purge and Engine Speed Ramp down to Idle time (C_AIM_tm_FT_SCR_Regen + C_EXM_SCRRegen_TResp_ | s |
| C_CHL_Surge_Margin_Limit_DeSoot | DPF / DOC / regen | Surge Margin Derate Limit for DeSoot mode | % |
| ACA_Urea_Level_Status | SCR / DEF / NOx | Indicate that urea tank level status. 0 - Normal, 1 - Too low, 2 - Too high, 3 - Override | None |
| AIF_AlphaSCR | SCR / DEF / NOx | Alpha request from SCR Bed Temp section of the Alpha algorithm (boolean 0 or 1) | None |
| APC_ti_LPrsCrankClearErr | SCR / DEF / NOx | Timer to clear a fuel pressure low cranking fault condition exists. | s |
| CBM_NOx_Humidity_Corr | SCR / DEF / NOx | NOx humidity correction factor | None |
| CBM_NOx_Out_PPM | SCR / DEF / NOx | Enigne out virtual nox value in ppm | PPM |
| AFW_Idle_Speed | Speed / cruise / idle | The idle speed calculated by the Alternator Failure warning feature | RPM |
| AIF_AlphaGovernor | Speed / cruise / idle | result of On Governor logic (boolean 0 or 1) | None |
| APP_On_Idle | Speed / cruise / idle | Indicates whether or not the Accelerator is in the Idle position. Value is determined by either idle validation switches or Secondary_Accel_Pedal_Pos, dependin | None |
| AP_Low_Idle_Switch | Speed / cruise / idle | Switch signal which indicates whether the accelerator pedal low idle switch is opened or closed. 0x00 Accelerator pedal not in low idle condition 0x01 Accel | None |
| Accelerator_Governor_Switch | Speed / cruise / idle | Debounced value of Accelerator Governor Switch physical input. When TRUE, this input causes Selected_Governor to toggle from "ABS" to "ABT" or vice versa depe | None |
| ADD_ct_LatchOffFault1 | Fault codes / derates | diagnostic counters for FSR latch off fault bits | counts |
| ADD_ct_LatchOffFault2 | Fault codes / derates | diagnostic counters for FSR latch off fault bits | counts |
| ADD_ct_LatchOffFault3 | Fault codes / derates | diagnostic counters for FSR latch off fault bits | counts |
| ADD_ct_LatchOffFault4 | Fault codes / derates | diagnostic counters for FSR latch off fault bits | counts |
| ADD_ct_LatchOffFault5 | Fault codes / derates | diagnostic counters for FSR latch off fault bits | counts |
| AIC_hp_MeasMeanPressure | Sensors / calibration | The average pressure during the injection measurement. | bar |
| AIC_hp_MeasPressureDrop | Sensors / calibration | The accumulator pressure drop that accompanied the injection measurement. | bar |
| AIC_t_MeasFuelTemp | Sensors / calibration | Accumulator temperature during the injection measurement. | Deg_C |
| AIP_WIF2_Sensor_Count | Sensors / calibration | This parameter provides the run-time filtered count for Second WIF Sensor. | counts |
| AIP_WIF2_Sensor_Voltage | Sensors / calibration | analog voltage for second water in fuel sensor input | V |
Sample of named calibration parameters with their Cummins descriptions. The full ECFG lists every parameter with ITN address, data type, scaling, limits and units.
Other BDS versions (26)
5.0.0.3ECFG · CM2880 · 2012-11-215.0.0.6ECFG · CM2880 · 2013-02-125.1.0.2ECFG · CM2880 · 2014-12-235.1.0.5ECFG · CM2880 · 2015-06-085.1.0.6ECFG · CM2880 · 2015-10-125.1.0.11ECFG · CM2880 · 2016-05-095.1.0.13ECFG · CM2880 · 2016-09-235.1.0.13ECFG · CM2880 · 2016-09-275.1.0.15ECFG · CM2880 · 2016-11-235.1.0.18ECFG · CM2880 · 2017-08-295.99.1.0ECFG · CM2880 · 2013-12-126.0.0.6ECFG · CM2880 · 2013-05-216.1.0.2ECFG · CM2880 · 2014-12-237.0.0.4ECFG · CM2880 · 2013-10-148.0.0.2ECFG · CM2880 · 2014-02-178.0.0.3ECFG · CM2880 · 2014-03-318.0.0.4ECFG · CM2880 · 2014-06-268.0.0.5ECFG · CM2880 · 2015-04-098.0.0.7ECFG · CM2880 · 2015-06-088.1.0.4ECFG · CM2880 · 2015-05-318.1.0.7ECFG · CM2880 · 2015-11-168.1.0.9ECFG · CM2880 · 2016-01-058.1.0.10ECFG · CM2880 · 2016-05-188.1.0.13ECFG · CM2880 · 2016-09-278.1.0.13ECFG · CM2880 · 2016-09-238.1.0.15ECFG · CM2880 · 2016-11-23
Buy & download
Loading checkout…