ECFG Superstore › BAG › 25.83.45.56
MY ACCOUNT / MY FILES →

Cummins BAG 25.83.45.56 ECFG — ISB6.7 CM2150 tuning definition

Cummins BAG 25.83.45.56 ECFG — the ECFG definition file (Cummins DAMOS equivalent) for ISB6.7 (Chrysler / Ram pickup (CM2100, 2007.5-2009)) on the CM21xx ECM: 14,265 named parameters for Calterm / WinOLS tuning — torque, fuelling, boost/VGT, EGR, DPF, SCR/DEF, speed limiter and fault-code tables. Build ID —, created 2010-09-20. Instant download after PayPal checkout.

FormatECFG — Engineering Tool Config File (XML)Product IDBAGSoftware version25.83.45.56ModuleCM21xxECU platformCM2150 / CM2150D / CM2150E (2008-2014)EngineISB6.7Application / marketChrysler / Ram pickup (CM2100, 2007.5-2009)ProgramBAG CM2100 AFP-BAG-C25.xx.xx.xx-25.83.45.56Build ID—Creation date2010-09-20Copyright year2010Parameters14,265 named parameters (<parameter> records)Interface level4.5.4.2First prod cfg file version2003.1.1.0Module part number9999999Boot loader range2.0.0.8 → 2.0.1.9Byte orderBigEndianIndex table address0x00042000Price$200 · instant download after PayPal checkoutHeader CRC1400File size10.8 MBArchive copies1 copy heldFormatECFG XML (Engineering Tool Config File) · opens in Cummins Calterm; converts to WinOLS map pack / A2L on request
<Engineering_Tool_Config_File version="25.83.45.56" crc="1400"> <compatibility_header> <calibration_version>25.83.45.56</calibration_version> <module_name>CM21xx</module_name> <product_id>BAG</product_id> <file_descriptor>Core-II Software Copyright 2010 Cummins Inc. - Cummins Confidential - BAG CM2100 AFP-BAG-C25.xx.xx.xx-25.83.45.56</file_descriptor>

What is inside this ECFG

14,265 parameters — 1,550 tables / axes. Counts by area (a parameter can sit in more than one):

645Torque / power
704Fuelling / rail
556Boost / turbo / VGT
556EGR
808DPF / DOC / regen
874SCR / DEF / NOx
748Speed / cruise / idle
547Fault codes / derates
662Sensors / calibration
ParameterAreaDescriptionUnits
ACA_TorqueTorque / powerTorque consumed by all ACAs.N_m
ACA_Torque_MaxTorque / powerTorque value that all ACA can consume at most.N_m
AECD_Trq_Drt_Ramp_RateTorque / poweremission manager aecd torqure ramp rates
Actual_Eng_Ind_Perc_Trq_Hi_ResTorque / powerParameter is used for broadcasting the high resolution portion of torque that goes with Actual_Eng_Indicated_Perc_Trq on J1939.%
Actual_Eng_Indicated_Perc_TrqTorque / powerParameter is used for broadcasting Actual Engine Percent Torque on the datalink%
AH_Fuel_Derate_LatchFuelling / rail[AHFLDRLA] Indicates turbo overspeed protection fuel derate [From 02 -- Units: UNITLESS Size:2 Digits:0 Signed:U Scalar:1] [Jims comp:{EMM}]None
AIF_AlphaFuelRateFuelling / railAlpha request from fuel rate section of the Alpha algorithm (boolean 0 or 1)None
AIF_FuelRateFuelling / railFuel Rate algorithm as determined by the alpha determination algorithm.kg/hr
Audit_TrailFuelling / railData space reserved in the ECM as a scratchpad for tools to record changes they have requested of the ECM. Reference CES14278 and GTIS requirements.
CBC_Trq2FuelCallListFuelling / railThis array contains all the addresses (pointers) of Torque2Fuel service functions that need to be exercised by the combustion manager base. The array is filled None
AIF_AlphaAAPTurboProtBoost / turbo / VGTAlpha contribution from ambient air pressure logic of the alpha algoirthm (boolean 0 or 1)None
AIP_Charge_Tmptr_Override_ValueBoost / turbo / VGTCharge_Tmptr override value when T_AIP_CHT_User_Override is set..Deg_C
BPS_BoostEngagedBoost / turbo / VGTHook identifying that Boost Power is actively engaged.None
BVC_s_LowBoostVoltageBoost / turbo / VGTlow boost voltage indicatorNone
Boost_Power_Request_SwitchBoost / turbo / VGTDebounced value of the Boost Power Request Switch.None
AIP_EGRDeltaPress_Override_ValEGREGR Delta Press user override value when T_AIP_EGRDeltaPress_Ovrd_En is set.kPa
AIP_EGROrificeTmptr2_Ovrd_ValEGREGR Orifice Temperature user override value when T_AIP_EGROrificeTmptr2_Ovrd_En is set.Deg_C
AIP_EGROrificeTmptr_Ovrd_ValEGREGR Orifice Temperature user override value when T_AIP_EGROrificeTmptr_Ovrd_En is set.Deg_C
Adjusted_EGR_FractionEGRAdjusted EGR fraction Engine Out PM Estimate. It is equal to EGR_Fraction+EGR_Fraction_AdjustmentNone
CBL_EGR_Frac_CmdEGREGR fraction command passed to Charge Manager from Combustion Manager BaseNone
C_AIM_DOC_In_DualPullupEnblDPF / DOC / regenFlag enabling the dual pullup for the thermistorNone
C_AIM_DOC_Out_DualPullupEnblDPF / DOC / regenFlag enabling the dual pullup for the thermistorNone
C_AIM_DPF_Lamp_IDDPF / DOC / regenDPF Lamp ID(1 = STOP, 2 = WARNING, 3 = MAINTENANCE,4,5,6 ... unmapped)None
C_AIM_DPF_OutP_Sensor_PresentDPF / DOC / regenFlag indicating if the system contains a gage pressure sensor at the outlet of the DPF.None
C_AIM_DPF_Out_DualPullupEnblDPF / DOC / regenFlag enabling the dual pullup for the thermistorNone
CBR_ColdAmb_NOxSCR / DEF / NOxCold Amb NOx Target Referenceg/HP*hr
CBR_Dosing_CylCutoutMaskSCR / DEF / NOxBit mapped mask indicating what cylinders are cutout for in-cylinder dosing. Bit 0=cut out cylinder 1, bit 1=cut out cylinder 2 etc. When the corresponding bit HEX
CBR_InCylDosing_FuelSCR / DEF / NOxIn Cylinder dosing Fuelmg/stroke
CBR_NOx_Cold_AMB_FactorSCR / DEF / NOxNOx Cold ambient factor calculated from look-up table based on coolant tmptr and IMT.None
CBR_NOx_Out_FracSCR / DEF / NOxNOx mass fraction from the estimatorNone
AFW_Idle_SpeedSpeed / cruise / idleThe idle speed calculated by the Alternator Failure warning featureRPM
AIF_AlphaGovernorSpeed / cruise / idleresult of On Governor logic (boolean 0 or 1)None
APP_On_IdleSpeed / cruise / idleIndicates whether or not the Accelerator is in the Idle position. Value is determined by either idle validation switches or Secondary_Accel_Pedal_Pos, dependinNone
AP_Low_Idle_SwitchSpeed / cruise / idleSwitch signal which indicates whether the accelerator pedal low idle switch is opened or closed. 0x00 Accelerator pedal not in low idle condition 0x01 AccelNone
Accelerator_Governor_SwitchSpeed / cruise / idleDebounced value of Accelerator Governor Switch physical input. When TRUE, this input causes Selected_Governor to toggle from "ABS" to "ABT" or vice versa depeNone
AIF_AlphaAltDerate_TimerFault codes / deratessemaphore used to latch AFC events that occur between alpha executionss
CAGT_Block_Fault_CodesFault codes / deratesArray of fault codes to be blocked. Fault codes can be found in CES14602 specification. Size of this array and hence the maximum number of faults that can be bl
CBM_Permit_FSO_DiagnosisFault codes / deratesPermit FSO Diagnosis IndicatorNone
CBR_Density_Derate_ErrorFault codes / deratesError due to Air Density silent derateNone
CBR_Density_Derate_Fault_TimerFault codes / deratesAir Density fault timer counts
AIP_WIF_Sensor_VoltageSensors / calibrationanalog voltage for water in fuel sensor inputV
APC_v_DslPrsSensorSensors / calibrationDiesel Rail Pressure Sensor Voltage (ref to 5V)V
APP2_Sensor_Supply_VoltageSensors / calibrationSecondary Accelerator Sensor supply voltage detected by the ECM.V
APP2_Sensor_VoltageSensors / calibrationSensor input voltage detected by the ECM for Secondary Accelerator.V
Accel_Position_Sensor_VoltsSensors / calibrationsensor voltage detected by the ECM.V

Sample of named calibration parameters with their Cummins descriptions. The full ECFG lists every parameter with ITN address, data type, scaling, limits and units.

Other BAG versions (34)

02.02.04.11ECFG · CM2150 · 2009-11-1016.02.13.28ECFG · CM2150 · 2011-05-2516.02.14.10ECFG · CM2150 · 2011-11-1616.02.15.19ECFG · CM2150 · 2013-06-1416.02.15.21ECFG · CM2150 · 2009-02-2616.02.16.16ECFG · CM2150 · 2013-02-0724.02.02.10ECFG · CM2150 · 2013-09-0624.02.04.21ECFG · CM2150 · 2010-04-1424.02.05.22ECFG · CM2150 · 2010-10-1225.02.39.80ECFG · CM2150 · 2011-06-2325.02.40.18ECFG · CM2150 · 2012-01-1125.02.41.22ECFG · CM2150 · 2012-08-1025.02.41.73ECFG · CM2150 · 2013-04-0325.02.41.82ECFG · CM2150 · 2009-06-0725.02.44.05ECFG · CM2150 · 2010-03-0425.02.44.58ECFG · CM2150 · 2011-01-1625.02.44.83ECFG · CM2150 · 2011-09-2125.02.44.88ECFG · CM2150 · 2009-09-1725.02.44.90ECFG · CM2150 · 2009-12-0425.02.46.17ECFG · CM2150 · 2012-09-1325.02.48.05ECFG · CM2150 · 2009-12-1625.42.40.20ECFG · CM2150 · 2010-04-1325.43.43.05ECFG · CM2150 · 2012-08-3025.43.43.09ECFG · CM2150 · 2012-08-3025.43.43.16ECFG · CM2150 · 2010-11-0625.43.43.90ECFG · CM2150 · 2012-08-1325.43.43.91ECFG · CM2150 · 2011-03-2825.83.45.55ECFG · CM2150 · 2011-05-0425.83.45.56ECFG · CM2150 · 2008-02-2625.83.48.06ECFG · CM2150 · 2008-04-1025.93.48.04ECFG · CM2150 · 2008-06-0430.32.00.21ECFG · CM2150 · 2008-08-2030.33.00.33ECFG · CM2150 · 2008-09-2630.33.02.03ECFG · CM2150 · 2009-03-25
Buy & download
Loading checkout…
Custom file service on your .xcal: DTC / full delete, extra HP, VGT delete