ECFG Superstore › BAC › 1.0.6.12
MY ACCOUNT / MY FILES →Cummins BAC 1.0.6.12 ECFG — ISX15 CM850 tuning definition
Cummins BAC 1.0.6.12 ECFG — the ECFG definition file (Cummins DAMOS equivalent) for ISX15 (Heavy duty on-highway) on the CM850 ECM: 7,544 named parameters for Calterm / WinOLS tuning — torque, fuelling, boost/VGT, EGR, DPF, SCR/DEF, speed limiter and fault-code tables. Build ID —, created 2005-05-11. Instant download after PayPal checkout.
FormatECFG — Engineering Tool Config File (XML)Product ID
BACSoftware version1.0.6.12ModuleCM850ECU platformCM850 / CM870 Core-II (2003-2007)EngineISX15Application / marketHeavy duty on-highwayEmissionsEPA07ProgramHD-X07-C-C12.00.00.21-ISX-1.0.6.12_00Build ID—Creation date2005-05-11Copyright year2005Parameters7,544 named parameters (<parameter> records)Interface level4.5.2.0First prod cfg file version2003.1.1.0Module part number3954430Boot loader range4.6.0.0 → 4.7.1.2Byte orderBigEndianIndex table address0x00510000Price$100 · instant download after PayPal checkoutHeader CRC01CCFile size5.3 MBArchive copies44 copies heldFormatECFG XML (Engineering Tool Config File) · opens in Cummins Calterm; converts to WinOLS map pack / A2L on request<Engineering_Tool_Config_File version="1.0.6.12" crc="01CC">
<compatibility_header>
<calibration_version>1.0.6.12</calibration_version>
<module_name>CM850</module_name>
<product_id>BAC</product_id>
<file_descriptor>Core-II Software Copyright 2005 Cummins Inc. - Cummins Confidential - HD-X07-C-C12.00.00.21-ISX-1.0.6.12_00</file_descriptor>
What is inside this ECFG
7,544 parameters — 1,013 tables / axes. Counts by area (a parameter can sit in more than one):
392Torque / power
443Fuelling / rail
412Boost / turbo / VGT
378EGR
68DPF / DOC / regen
33SCR / DEF / NOx
559Speed / cruise / idle
354Fault codes / derates
536Sensors / calibration
| Parameter | Area | Description | Units |
|---|---|---|---|
| ACA_Torque | Torque / power | Torque consumed by all ACAs. | N_m |
| ACA_Torque_Max | Torque / power | Torque value that all ACA can consume at most. | N_m |
| Actual_Eng_Indicated_Perc_Trq | Torque / power | Parameter is used for broadcasting Actual Engine Percent Torque on the datalink | % |
| All_Powerdown_Data_Lost_Run | Torque / power | Flag indicating if engine should be run if All_Powerdown_Data_Lost_Error is TRU | HEX |
| Boost_Power_Request_Switch | Torque / power | Debounced value of the Boost Power Request Switch. | None |
| AH_Fuel_Derate_Latch | Fuelling / rail | [AHFLDRLA] Indicates turbo overspeed protection fuel derate [From 02 -- Units: UNITLESS Size:2 Digits:0 Signed:U Scalar:1] [Jims comp:{EMM}] | None |
| AIF_AlphaFuelRate | Fuelling / rail | Alpha request from fuel rate section of the Alpha algorithm (boolean 0 or 1) [From 02 -- Units: UNITLESS Size:2 Digits:0 Signed:U Scalar:1] [Jims comp:{EMM | None |
| AIF_FuelRate | Fuelling / rail | [APFLRTAP] Fuel Rate algorithm as determined by the alpha determination algorithm [From 02 -- Units: UNITLESS Size:2 Digits:0 Signed:U Scalar:1] [Jims | kg/hr |
| Audit_Trail | Fuelling / rail | Data space reserved in the ECM as a scratchpad for tools to record changes they have requested of the ECM. Reference CES14278 and GTIS requirements. The audit | |
| BPC_q_FuelComp_v | Fuelling / rail | Fueling command adjustment made to compensate for boost pressure. | MG/STROKE |
| AIF_AlphaAAPTurboProt | Boost / turbo / VGT | [APAAPRSS] Alpha contribution from ambient air pressure logic of the alopha algoirthm (boolean 0 or 1) [From 02 -- Units: UNITLESS Size:2 Digits:2 Sign | None |
| BPC_lp_BoostErr_v | Boost / turbo / VGT | Difference between measured and FSSC reference boost. | MBAR |
| BPC_lp_NomBoostTblZ_c | Boost / turbo / VGT | Boost pressure reference from FSSC mapping. | |
| BPC_lp_NomBoost_v | Boost / turbo / VGT | Reference boost pressure from FSSC mapping. | MBAR |
| BPC_n_NomBoostTblX_c | Boost / turbo / VGT | RPM axis of nominal boost and boost sensitivity tbls. | |
| CBL_EGR_Frac_Cmd | EGR | EGR fraction command passed to Charge Manager from Combustion Manager [From 02 -- Units: UNITLESS Size:2 Digits:3 Signed:U Scalar:0.00012207] [Jims co | None |
| CBO_EGR_Frac_Ref | EGR | EGR fraction reference after off-nominal compensation | None |
| CBR_Base_Chi_EGR_Frac_Cmd | EGR | EGR Fraction derived from chi_base [From 02 -- Units: UNITLESS Size:2 Digits:3 Signed:U Scalar:0.00012207] [Jims comp:{CBM}] | None |
| CBR_EGR_Frac_Ref | EGR | EGR fraction reference, unlimited and uncompensated [From 02 -- Units: UNITLESS Size:2 Digits:3 Signed:U Scalar:0.00012207] [Jims comp:{CBM}] | None |
| CBR_EGR_Off | EGR | EGR is off by EMM permission or user override | None |
| CSE_Regen_Error | DPF / DOC / regen | Error value of the specified control parameter for MCF error upper limit . | kPa |
| CSE_Regen_Ref_Table | DPF / DOC / regen | Reference value for MCF error upper limit based on specified control parameter. | kPa |
| C_CBR_Chi_Regen_EL | DPF / DOC / regen | Force chi.el to this value upon PTM A/T regen request | g/HP*hr |
| C_CBR_Chi_Regen_Value | DPF / DOC / regen | Force Chi to this value upon PTM A/T regen request | None |
| C_CSE_Regen_Mode | DPF / DOC / regen | OCVGT control parameter selector( 0=no parameter, 1= Engine Delta Pressure, 2 = Exhaust Presure) | None |
| CBO_bsNOx | SCR / DEF / NOx | CBR_NOx_Target_Ref adjusted for off-nominal conditions [From 02 -- Units: G/HP*HR Size:2 Digits:3 Signed:U Scalar:0.000244140625] [Jims comp:{CBM}] | g/HP*hr |
| CBR_NOx_Target_Ref | SCR / DEF / NOx | NOx target reference [From 02 -- Units: G/HP*HR Size:2 Digits:3 Signed:U Scalar:0.000488281] [Jims comp:{CBM}] | g/HP*hr |
| C_CBO_fsNOx_Ratio_Table | SCR / DEF / NOx | output axis of fsNOx ratio table [From 02 -- Units: UNITLESS Size:2 Digits:4 Signed:U Scalar:0.00012207] [Jims comp:{CBM}] | |
| C_DIP_DiscreteCoolantLevelDelay | SCR / DEF / NOx | The delay before engine coolant detected switches affect the Coolant Level Low Error. | s |
| C_J1939_EC_Def_TqCrv_Number | SCR / DEF / NOx | The default torque curve index number to use for J1939 Engine Configuration message speed points when the torque curve index returned by the Machine Manager is | None |
| AFW_Idle_Speed | Speed / cruise / idle | The idle speed calculated by the Alternator Failure warning feature | RPM |
| AIF_AlphaGovernor | Speed / cruise / idle | [APGVAP] result of On Governor logic (boolean 0 or 1) [From 02 -- Units: UNITLESS Size:2 Digits:0 Signed:U Scalar:1] [Jims comp:{EMM}] | None |
| APP_On_Idle | Speed / cruise / idle | Indicates whether or not the Accelerator is in the Idle position. Value is determined by either idle validation switches or Secondary_Accel_Pedal_Pos, dependin | None |
| AP_Low_Idle_Switch | Speed / cruise / idle | Switch signal which indicates whether the accelerator pedal low idle switch is opened or closed. 0x00 Accelerator pedal not in low idle condition 0x01 Accel | None |
| Accelerator_Governor_Switch | Speed / cruise / idle | Debounced value of Accelerator Governor Switch physical input. When TRUE, this input causes Selected_Governor to toggle from "ABS" to "ABT" or vice versa depe | None |
| AIF_AltitudeDerateTimer | Fault codes / derates | semaphore used to latch AFC events that occur between alpha executions [From 02 -- Units: SEC Size:2 Digits:0 Signed:U Scalar:0.2] [Jims comp:{EMM}] | s |
| AMB_AirPressDefault | Fault codes / derates | Air_Press_Sensor global default value [From 02 -- Units: IN_HG Size:2 Digits:2 Signed:U Scalar:0.0159064138077] [Jims comp:{EMM}] | kPa |
| CFTR_Fault_2_Lamp_Map | Fault codes / derates | A one dimensional array whose index is the same as error_index. It stores the lamp to light for each error. This design supports up to 8 lamps. 0000 0000 00 | |
| CFTR_Fault_Count_Table | Fault codes / derates | This array contains the current fault count for each fault that is currently active in the system. The fault count for each error is incremented each time the | |
| CFTR_Fault_Status_Table | Fault codes / derates | This array contains the current error state for each fault that is currently active in the system. The index into this array is associated with a system error | |
| AMB_AirPressSensorPriority | Sensors / calibration | Air_Pressure_Sensor mux override priority [From 02 -- Units: UNITLESS Size:1 Digits:0 Signed:U Scalar:1] [Jims comp:{EMM}] | None |
| APP2_Sensor_Supply_Voltage | Sensors / calibration | Secondary Accelerator Sensor supply voltage detected by the ECM. | V |
| APP2_Sensor_Voltage | Sensors / calibration | Sensor input voltage detected by the ECM for Secondary Accelerator. | V |
| APP_Sensor_Supply_Volts | Sensors / calibration | sensor supply voltage for Accelerator pedal position sensor. | V |
| Accel_Position_Sensor_Volts | Sensors / calibration | sensor voltage detected by the ECM. | V |
Sample of named calibration parameters with their Cummins descriptions. The full ECFG lists every parameter with ITN address, data type, scaling, limits and units.
Other BAC versions (17)
6.2.0.24ECFG · CM871 · 2006-09-078.0.0.24ECFG · CM871 · 2007-08-038.0.0.32ECFG · CM871 · 2007-10-318.0.0.33ECFG · CM871 · 2008-01-108.0.0.43ECFG · CM871 · 2008-07-108.0.0.54ECFG · CM871 · 2009-02-108.0.0.62ECFG · CM871 · 2009-07-228.0.0.70ECFG · CM871 · 2009-02-128.0.0.70ECFG · CM871 · 2010-01-268.0.0.82ECFG · CM871 · 2010-11-128.0.0.84ECFG · CM871 · 2018-09-278.0.0.91ECFG · CM871 · 2009-02-128.0.0.91ECFG · CM871 · 2011-05-238.0.0.91ECFG · CM871 · 2011-05-238.0.0.97ECFG · CM871 · 2013-02-068.0.0.99ECFG · CM871 · 2013-07-028.0.0.99ECFG · CM871 · 2018-09-16
Buy & download
Loading checkout…